BadAss BA-3515-580 Performance Test Data
Magnets Motor Wind Motor Kv No-Load Current Motor Resistance I Max P Max (6S)
14-Pole 20-Turn Delta 580 RPM/Volt Io = 1.02 Amps @ 10v Rm = 0.041 Ohms 48 Amps 1070 W 
 
Stator Outside Diameter Body Length Total Shaft Length Shaft Diameter Motor Weight
12-Slot 43.5 mm,  1.713 in. 41.0 mm,  1.614 in. 63.0 mm,  2.480 in. 5.00 mm,  0.197 in. 191 gm,   6.73 oz
 
Test Data From Input 10.0 V 12.0 V 14.0V 16.0V Measured Kv value Measured Rm Value
Sample Motor Io Value 1.024 A 1.062 A 1.124 A 1.186 A 579 RPM/Volt @ 10V 0.0414 Ohms
 
4-cell Li-Po Test Data
Prop Prop Li-Po Input Motor Watts Prop Pitch Thrust  Thrust Thrust Eff.
Manf. Size Cells Voltage Amps Input RPM Speed Grams Ounces Grams/W
APC 11x10-E 4 14.8 23.28 344.5 7,415 70.2 1315 46.40 3.82
APC 12x6-E 4 14.8 18.18 269.0 7,650 43.5 1628 57.43 6.05
APC 12x7x3-E 4 14.8 24.56 363.4 7,351 48.7 2047 72.21 5.63
APC 12x8-E 4 14.8 23.22 343.6 7,394 56.0 1572 55.46 4.58
APC 12x10-E 4 14.8 28.24 417.9 7,157 67.8 1642 57.92 3.93
APC 12x12-E 4 14.8 32.96 487.7 6,910 78.5 1511 53.31 3.10
APC 13x4-E 4 14.8 15.81 233.9 7,775 29.5 1603 56.55 6.85
APC 13x5.5-E 4 14.8 20.28 300.1 7,557 39.4 1886 66.54 6.29
APC 13x6.5-E 4 14.8 25.58 378.6 7,278 44.8 2105 74.25 5.56
APC 13x6.5-F2B 4 14.8 25.94 383.9 7,264 44.7 2109 74.38 5.49
APC 13x7-F 4 14.8 22.61 334.6 7,454 49.4 2005 70.73 5.99
APC 13x8-E 4 14.8 28.13 416.3 7,148 54.2 2147 75.72 5.16
APC 13x10-E 4 14.8 37.02 547.9 6,733 63.8 1957 69.01 3.57
APC 13x10-F 4 14.8 29.11 430.9 7,120 67.4 2226 78.53 5.17
APC 14x6-E 4 14.8 24.28 359.4 7,364 41.8 2224 78.43 6.19
APC 14x7-E 4 14.8 31.91 472.3 6,979 46.3 2488 87.75 5.27
APC 14x8.5-E 4 14.8 34.00 503.2 6,877 55.4 2550 89.94 5.07
APC 14x10-E 4 14.8 34.05 504.0 6,873 65.1 2517 88.77 4.99
APC 14x10-F 4 14.8 37.42 553.8 6,728 63.7 2664 93.98 4.81
APC 15x4-E 4 14.8 25.91 383.5 7,275 27.6 2444 86.22 6.37
APC 15x6-E 4 14.8 33.88 501.4 6,895 39.2 2809 99.10 5.60
APC 15x7-E 4 14.8 33.86 501.1 6,884 45.6 2801 98.80 5.59
APC 15x8-E 4 14.8 36.45 539.5 6,747 51.1 2811 99.17 5.21
APC 15x10-E 4 14.8 47.10 697.1 6,151 58.2 2890 101.92 4.14
APC 16x7-E 4 14.8 42.88 634.7 6,400 42.4 3259 114.96 5.14
APC 16x8-E 4 14.8 50.95 754.1 6,161 46.7 3413 120.38 4.53
APC 17x7-E 4 14.8 46.26 684.7 6,205 41.1 3506 123.67 5.12
APC 17x8-E 4 14.8 55.14 816.0 5,886 44.6 3722 131.29 4.56
BadAss 12x7-EW 4 14.8 20.80 307.9 7,535 49.9 1685 59.43 5.47
BadAss 12x8-EW 4 14.8 25.43 376.3 7,294 55.3 1431 50.47 3.80
BadAss 13x6-EW 4 14.8 21.06 311.6 7,525 42.8 1838 64.83 5.90
BadAss 13x8-EW 4 14.8 28.78 425.9 7,138 54.1 1986 70.04 4.66
BadAss 13x10-EW 4 14.8 37.70 558.0 6,690 63.4 1834 64.70 3.29
BadAss 14x6-EW 4 14.8 27.66 409.4 7,178 40.8 2215 78.12 5.41
BadAss 14x8-EW 4 14.8 33.33 493.3 6,913 52.4 2508 88.47 5.09
BadAss 14x10-EW 4 14.8 42.79 633.3 6,409 60.7 2464 86.91 3.89
BadAss 15x6-EW 4 14.8 35.07 519.0 6,825 38.8 2722 96.00 5.24
BadAss 15x7-EW 4 14.8 33.86 501.1 6,884 45.6 2801 98.80 5.59
BadAss 15x8-EW 4 14.8 37.71 558.1 6,690 50.7 2835 100.02 5.08
BadAss 15x10-EW 4 14.8 48.40 716.3 6,095 57.7 2609 92.02 3.64
BadAss 16x6-EW 4 14.8 39.58 585.8 6,583 37.4 3074 108.44 5.25
BadAss 16x7-EW 4 14.8 42.72 632.3 6,405 42.5 3114 109.84 4.93
BadAss 16x8-EW 4 14.8 47.21 698.8 6,156 46.6 3123 110.17 4.47
BadAss 16x10-EW 4 14.8 52.04 770.2 6,027 57.1 3337 117.72 4.33
BadAss 17x6-EW 4 14.8 47.08 696.7 6,150 34.9 3289 116.02 4.72
BadAss 17x8-EW 4 14.8 54.01 799.3 6,013 45.6 3675 129.63 4.60
GemFan 12x8-F 4 14.8 23.71 350.9 7,391 56.0 1651 58.22 4.70
GemFan 13x8-F 4 14.8 24.75 366.2 7,306 55.3 1975 69.68 5.39
MAS 12x6x3 4 14.8 21.25 314.5 7,517 42.7 1812 63.90 5.76
MAS 12x8x3 4 14.8 29.83 441.4 7,067 53.5 2277 80.33 5.16
MAS 13x8x3 4 14.8 32.58 482.2 6,959 52.7 2454 86.58 5.09
MAS 14x7x3 4 14.8 38.33 567.3 6,663 44.2 2863 100.98 5.05
MAS 14x9x3 4 14.8 45.02 666.2 6,307 53.8 3112 109.77 4.67
MAS 15x7x3 4 14.8 46.07 681.8 6,223 41.3 3235 114.10 4.74
 
5-cell Li-Po Test Data
Prop Prop Li-Po Input Motor Watts Prop Pitch Thrust  Thrust Thrust Eff.
Manf. Size Cells Voltage Amps Input RPM Speed Grams Ounces Grams/W
APC 10x8-E 5 18.5 20.95 387.6 9,464 71.7 1562 55.11 4.03
APC 10x10-E 5 18.5 28.78 532.4 9,070 85.9 1406 49.60 2.64
APC 11x5.5-E 5 18.5 20.20 373.7 9,504 49.5 1938 68.35 5.19
APC 11x7-E 5 18.5 24.47 452.7 9,289 61.6 2092 73.80 4.62
APC 11x7x3-E 5 18.5 25.29 467.9 9,251 61.3 2287 80.66 4.89
APC 11x8-E 5 18.5 27.12 501.6 9,155 69.4 1968 69.43 3.92
APC 11x8-F 5 18.5 22.06 408.1 9,409 71.3 1954 68.92 4.79
APC 11x8.5-E 5 18.5 29.11 538.4 9,050 72.8 2100 74.07 3.90
APC 11x10-E 5 18.5 33.80 625.3 8,820 83.5 1891 66.71 3.02
APC 12x6-E 5 18.5 27.24 504.0 9,143 51.9 2455 86.61 4.87
APC 12x6-F2B 5 18.5 27.17 502.6 9,169 56.4 2435 85.90 4.85
APC 12x8-E 5 18.5 34.44 637.1 8,782 66.5 2274 80.22 3.57
APC 12x8.5-F 5 18.5 28.70 531.0 9,076 73.1 2487 87.72 4.68
APC 12x10-E 5 18.5 41.18 761.8 8,429 79.8 2324 81.96 3.05
APC 12x12-E 5 18.5 45.68 845.0 8,164 92.8 2122 74.84 2.51
APC 13x4-E 5 18.5 23.25 430.1 9,343 35.4 2421 85.39 5.63
APC 13x4.5-F2B 5 18.5 27.76 513.6 9,150 39.0 2669 94.13 5.20
APC 13x5.5-E 5 18.5 29.51 545.9 9,033 47.0 2786 98.27 5.10
APC 13x6.5-E 5 18.5 38.18 706.4 8,588 52.9 3070 108.28 4.35
APC 13x6.5-F2B 5 18.5 39.86 737.3 8,519 52.4 2764 97.50 3.75
APC 13x7-F 5 18.5 32.75 605.9 8,878 58.9 2946 103.93 4.86
APC 13x8-E 5 18.5 41.20 762.2 8,430 63.9 3020 106.52 3.96
APC 13x10-E 5 18.5 53.84 996.1 7,701 72.9 2579 90.98 2.59
APC 13x10-F 5 18.5 41.86 774.4 8,402 79.6 3196 112.74 4.13
APC 14x6-E 5 18.5 35.07 648.8 8,744 49.7 3242 114.35 5.00
APC 14x7-E 5 18.5 47.12 871.7 8,103 53.7 3462 122.10 3.97
APC 14x8.5-E 5 18.5 48.52 897.5 7,996 64.4 3508 123.76 3.91
APC 14x10-E 5 18.5 48.71 901.1 8,006 75.8 3496 123.33 3.88
APC 15x4-E 5 18.5 38.14 705.6 8,591 32.5 3588 126.56 5.08
APC 15x6-E 5 18.5 48.69 900.8 7,995 45.4 3909 137.89 4.34
APC 15x7-E 5 18.5 47.92 886.5 8,036 53.3 3905 137.74 4.40
APC 15x8-E 5 18.5 52.31 967.6 7,908 59.9 3912 137.99 4.04
BadAss 10x8-EW 5 18.5 21.39 395.7 9,445 71.6 1362 48.05 3.44
BadAss 11x7-EW 5 18.5 20.27 375.1 9,505 63.0 1826 64.40 4.87
BadAss 11x8-EW 5 18.5 27.00 499.5 9,163 69.4 1650 58.20 3.30
BadAss 12x6-EW 5 18.5 24.88 460.2 9,265 52.6 2187 77.15 4.75
BadAss 12x7-EW 5 18.5 30.31 560.7 9,000 59.7 2308 81.42 4.12
BadAss 12x8-EW 5 18.5 36.08 667.5 8,705 65.9 2040 71.97 3.06
BadAss 13x6-EW 5 18.5 30.10 556.8 9,009 51.2 2690 94.89 4.83
BadAss 13x8-EW 5 18.5 41.05 759.4 8,452 64.0 2745 96.83 3.61
BadAss 13x10-EW 5 18.5 53.03 981.0 7,885 74.7 2533 89.35 2.58
BadAss 14x6-EW 5 18.5 39.83 736.9 8,506 48.3 3169 111.78 4.30
BadAss 14x8-EW 5 18.5 46.64 862.8 8,105 61.4 3481 122.78 4.03
BadAss 15x6-EW 5 18.5 49.15 909.3 7,956 45.2 3765 132.82 4.14
BadAss 16x6-EW 5 18.5 56.08 1037.4 7,717 43.8 4345 153.25 4.19
GemFan 11x8-F 5 18.5 27.48 508.3 9,140 69.2 1894 66.80 3.73
GemFan 12x8-F 5 18.5 34.88 645.2 8,745 66.3 2382 84.03 3.69
GemFan 13x8-F 5 18.5 34.94 646.4 8,763 66.4 2838 100.12 4.39
MAS 10x7x3 5 18.5 21.61 399.7 9,433 62.5 1906 67.22 4.77
MAS 11x7x3 5 18.5 26.77 495.2 9,170 60.8 2296 80.99 4.64
MAS 11x8x3 5 18.5 29.14 539.0 9,056 68.6 2392 84.37 4.44
MAS 12x6x3 5 18.5 30.19 558.5 8,998 51.1 2643 93.23 4.73
MAS 12x8x3 5 18.5 41.94 775.8 8,383 63.5 3229 113.90 4.16
MAS 13x8x3 5 18.5 45.12 834.8 8,203 62.1 3424 120.79 4.10
MAS 14x7x3 5 18.5 54.32 1004.9 7,908 52.4 4083 144.01 4.06
 
6-cell Li-Po Test Data
Prop Prop Li-Po Input Motor Watts Prop Pitch Thrust  Thrust Thrust Eff.
Manf. Size Cells Voltage Amps Input RPM Speed Grams Ounces Grams/W
APC 10x6-E 6 22.2 21.71 481.9 11,349 64.5 1977 69.72 4.10
APC 10x7-E 6 22.2 25.35 562.7 11,145 73.9 2093 73.81 3.72
APC 10x8-E 6 22.2 29.25 649.4 10,945 82.9 2101 74.11 3.24
APC 10x10-E 6 22.2 38.42 853.0 10,469 99.1 1888 66.58 2.21
APC 11x5.5-E 6 22.2 28.29 628.1 10,994 57.3 2711 95.61 4.32
APC 11x7-E 6 22.2 33.96 753.8 10,704 71.0 2855 100.69 3.79
APC 11x7x3-E 6 22.2 34.47 765.2 10,678 70.8 3132 110.48 4.09
APC 11x8-E 6 22.2 37.66 836.0 10,506 79.6 2683 94.65 3.21
APC 11x8.5-E 6 22.2 40.34 895.6 10,365 83.4 2771 97.73 3.09
APC 11x10-E 6 22.2 45.68 1014.0 10,082 95.5 2474 87.28 2.44
APC 12x6-E 6 22.2 38.07 845.2 10,468 59.5 3360 118.52 3.98
APC 12x6-F2B 6 22.2 38.21 848.3 10,510 64.7 3343 117.92 3.94
APC 12x8-E 6 22.2 46.50 1032.2 10,003 75.8 2980 105.11 2.89
APC 12x10-E 6 22.2 55.81 1239.0 9,398 89.0 2908 102.56 2.35
APC 13x4-E 6 22.2 32.15 713.8 10,789 40.9 3356 118.39 4.70
APC 13x4.5-F2B 6 22.2 38.97 865.1 10,470 44.6 3661 129.13 4.23
APC 13x5.5-E 6 22.2 40.08 889.8 10,365 54.0 3754 132.43 4.22
APC 13x6.5-E 6 22.2 52.91 1174.7 9,588 59.0 3776 133.19 3.21
APC 13x6.5-F2B 6 22.2 54.62 1212.5 9,492 58.4 3467 122.31 2.86
APC 14x6-E 6 22.2 47.77 1060.5 9,928 56.4 4325 152.56 4.08
APC 15x4-E 6 22.2 53.11 1179.0 9,838 37.3 4888 172.43 4.15
BadAss 10x5-EW 6 22.2 16.96 376.5 11,605 87.9 1673 59.02 4.44
BadAss 10x6-EW 6 22.2 24.30 539.3 11,209 63.7 1701 59.98 3.15
BadAss 10x7-EW 6 22.2 25.62 568.8 11,138 73.8 1655 58.36 2.91
BadAss 10x8-EW 6 22.2 28.66 636.3 10,975 83.1 1838 64.85 2.89
BadAss 11x5-EW 6 22.2 23.04 511.5 11,275 85.4 2194 77.39 4.29
BadAss 11x6-EW 6 22.2 27.08 601.1 11,061 62.8 2514 88.68 4.18
BadAss 11x7-EW 6 22.2 27.42 608.7 11,042 73.2 2480 87.47 4.07
BadAss 11x8-EW 6 22.2 36.37 807.4 10,573 80.1 2205 77.77 2.73
BadAss 12x6-EW 6 22.2 33.87 751.9 10,706 60.8 2934 103.48 3.90
BadAss 12x7-EW 6 22.2 40.88 907.4 10,338 68.5 3031 106.92 3.34
BadAss 12x8-EW 6 22.2 47.80 1061.2 9,928 75.2 2669 94.15 2.52
BadAss 13x6-EW 6 22.2 40.22 892.8 10,370 58.9 3601 127.03 4.03
BadAss 13x8-EW 6 22.2 56.55 1255.4 9,611 72.8 3391 119.61 2.70
BadAss 14x6-EW 6 22.2 54.07 1200.4 9,710 55.2 4191 147.83 3.49
GemFan 10x6-F 6 22.2 19.00 421.7 11,494 65.3 1920 67.72 4.55
GemFan 11x8-F 6 22.2 37.45 831.4 10,515 79.7 2550 89.94 3.07
GemFan 12x8-F 6 22.2 47.48 1054.0 9,940 75.3 3123 110.17 2.96
GemFan 13x8-F 6 22.2 46.19 1025.4 10,010 75.8 3767 132.89 3.67
MAS 9x7x3 6 22.2 21.88 485.6 11,330 75.1 2017 71.15 4.15
MAS 10x5x3 6 22.2 19.47 432.3 11,463 54.3 2027 71.50 4.69
MAS 10x7x3 6 22.2 28.94 642.4 10,959 72.6 2607 91.95 4.06
MAS 11x7x3 6 22.2 35.48 787.7 10,626 70.4 3092 109.08 3.93
MAS 11x8x3 6 22.2 38.78 860.9 10,446 79.1 3212 113.30 3.73
MAS 12x6x3 6 22.2 40.03 888.8 10,365 58.9 3525 124.34 3.97
MAS 12x8x3 6 22.2 55.61 1234.5 9,618 72.9 4270 150.62 3.46
                     
                     
© 2019 Innov8tive Designs, Inc. 
This chart, and the data contained within it, are the property of Innov8tive Designs, Inc., and may not be reproduced without permission from the author. 
Propeller Chart Color Code Explanation
   The prop is to small to get good performance from the motor. (Less than 50% power)
   The prop is sized right to get good power from the motor. (50 to 80% power)
   The prop can be used, but full throttle should be kept to short bursts. (80 to 100% power)
   The prop is too big for the motor and should not be used. (Over 100% power)
Notes about Propellers used in the Motor Tests
APC Props with -E on the part number are from the APC Thin Electric Series.  Example:  APC 10x6-E
APC Props with -F on the part number are from the APC Folding Electric Series.  Example:  APC 11x8-F
APC Props with -SF on the part number are from the APC Slow-Fly Electric Series.  Example:  APC 10x4.7-SF
APC Props with -P on the part number are from the APC Pylon Racing Series.  Example:  APC 6.5x5.5-P
APC Props with -SP on the part number are from the APC Sport Glow Series.  Example:  APC 7x6-SP
BadAss Props with -EW on the part number are from the BadAss Electric Wood Series.  Example:  BadAss 11x6-EW
GemFan Props with -F on the part number are from the GemFan Folding Electric Series.  Example:  GemFan 10x6-F
MAS Props are Master Airscrew 3-Blade Propellers.  Example:  MAS 10x5x3
PLEASE NOTE:
The Data contained in this Prop Chart is based on actual measurements, taken in a controlled test environment, at an altitude of
584 feet above sea level.  The test voltages used are based on the standard output of a Li-Po battery under load, which is 3.70 volts
per cell.  If you are using a battery that is larger in capacity than normal, or has a very high C-rating, then your actual voltages will
be higher than those shown in the chart, and this will result in a higher current and power value for every prop used.  You should
always test your actual power system with a watt meter before flying your model to make sure that you are not exceeding the 
recommended current and power ratings of the motor being used.  The prop recommendations in this chart assume that the motor
receives adequate cooling throughout its operation.  If your motor is being used inside a cowl or fuselage, you must ensure that
the motor receives sufficient airflow, and does not get too hot during operation.  It is always best to use a prop size that pulls no
more than 80% of the motors maximum recommended current value to ensure safe operation under all conditions.